FAA / Advisory circular

AC 25.1309-1B

System Design and Analysis

System design, failure conditions, analysis and the evidence supporting a system safety assessment.

Start with the scope.

Guidance for showing compliance with §25.1309. Confirm the applicable amendment level and accepted means for the programme.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Find your starting point

What are you looking into?

Go directly to a useful part of the document.

Read the source

The document, within reach.

FAA source document

Printed page 1-4

PDF page 9 of 75

FAA source text, reformatted for reading. Page boundaries and paragraph numbers are retained.

However, these ACs may not provide complete guidance for compliance with § 25.1309.

1.2.2.12 Although § 25.1309 is always applicable to approved operating conditions (on ground and in flight) of the airplane or system, it is only applicable to ground operating conditions when the airplane is in service. While ground operating conditions include conditions associated with line maintenance, dispatch determinations, embarkation and disembarkation, taxi, and the like, they do not include periods of shop maintenance, storage, or other out-of-service activities.

1.2.2.13 Where relevant, applicants should also account for risks to persons other than airplane occupants, such as ground crew, when assessing systems failure conditions for compliance with § 25.1309. For this assessment, ground crew persons are aircraft handling, maintenance, or servicing personnel adjacent to the aircraft while it is in a ground operating condition. The risks include threats to people on the ground or adjacent to the airplane during ground operations, electric shock threats to mechanics, atmospheric threats to mechanics, unwanted door or thrust reverser movement, and other similar situations.

1.3 Cancellation. This AC cancels AC 25.1309-1A, dated June 21, 1988.

1.4 Related Documents. The following regulatory and advisory materials are related to this AC:

1.4.1 Related Regulations. The following 14 CFR part 25 regulations are related to this AC. You can download the full text of these regulations from the Federal Register website at Electronic Code of Federal Regulations, jointly administered by the Office of the Federal Register (OFR) of the National Archives and Records Administration (NARA) and the U.S. Government Publishing Office (GPO). You can order a paper copy from the U.S. Superintendent of Documents, U.S. Government Publishing Office, Washington, D.C. 20401; at Government Publishing Office, by calling telephone number (202) 512-1800; or by sending a fax to (202) 512-2250.

• Section 25.4, Definitions.

• Section 25.302, Interaction of systems and structures.

• Section 25.305, Strength and deformation.

• Section 25.365, Pressurized compartment loads.

• Section 25.571, Damage-tolerance and fatigue evaluation of structure.

• Section 25.629, Aeroelastic stability requirements.

AC 25.1309-1B · 1-4Open saved PDF here ↗

Saved from the FAA on November 16, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Connect the analysis
to the design.

A useful assessment explains why the architecture meets the safety objectives, what assumptions it relies on, and how those assumptions will be verified. We use the guidance to structure the questions and evidence around the actual system.

01 / Define the failure conditions

Begin with functions and effects.

Describe the operating context, affected functions, crew response and interactions with other systems. Carry the resulting safety objectives into the architecture and requirements.

FHA guidance · §6.2 →
02 / Examine the architecture

Make independence and exposure explicit.

Explain monitoring, fault containment and common causes. Examine significant latent failures and the assumptions about how long a failure can remain present.

Latent failures · §5.3.6 →Common cause · §7.4 →
Methods and editions need to be agreed.

Our practice uses ARP4761A and ARP4754B to organise safety assessment and systems development work. This AC refers to ARP 4761 and ARP 4754 without revision letters. Its references alone do not establish acceptance of a particular revision for a programme.

Source edition and reading coverage

75 original pages. 55 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 90e625593d472b74ec69fbcefe97649f97794410dbe844f7684b397121ac5a92

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →