FAA / Advisory circular

AC 25.1309-1B

System Design and Analysis

System design, failure conditions, analysis and the evidence supporting a system safety assessment.

Start with the scope.

Guidance for showing compliance with §25.1309. Confirm the applicable amendment level and accepted means for the programme.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Find your starting point

What are you looking into?

Go directly to a useful part of the document.

Read the source

The document, within reach.

FAA source document

Printed page G-1

PDF page 74 of 75

Enlarge original ↗

Acronym table

Original FAA AC 25.1309-1B, PDF page 74
AC 25.1309-1B · G-1Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

APPENDIX G. ACRONYMS

14 CFR Title 14, Code of Federal Regulations

AFM Airplane Flight Manual

ALS Airworthiness Limitations Section

AMC Acceptable Means of Compliance

AMJ Advisory Material Joint

ARAC Aviation Rulemaking Advisory Committee

ARP Aerospace Recommended Practice

ASAWG Airplane-Level Safety Analysis Working Group

BCAR British Civil Airworthiness Requirements

CMA Common Mode Analysis

CCMR Candidate Certification Maintenance Requirement

CEA Cascading Events Analysis

CMR Certification Maintenance Requirement

CSL+1 Catastrophic with Single Latent Plus One

EASA European Union Aviation Safety Agency

ETOPS Extended Range Twin-engine operations Performance Standards

FAA Federal Aviation Administration

FHA Functional Hazard Assessment

FMEA Failure Modes and Effects Analysis

ICA Instructions for Continued Airworthiness

JAA Joint Aviation Authorities

PRA Particular Risk Analysis

PSSA Preliminary System Safety Assessment

RTCA RTCA, Inc. (formerly “Radio Technical Commission for Aeronautics”)

SAE SAE International (formerly “Society of Automotive Engineers”)

SLF Significant Latent Failure

SSA System Safety Assessment

STC Supplemental Type Certificate

TC Type Certificate

TSO Technical Standard Order

ZSA Zonal Safety Analysis

Saved from the FAA on November 16, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Connect the analysis
to the design.

A useful assessment explains why the architecture meets the safety objectives, what assumptions it relies on, and how those assumptions will be verified. We use the guidance to structure the questions and evidence around the actual system.

01 / Define the failure conditions

Begin with functions and effects.

Describe the operating context, affected functions, crew response and interactions with other systems. Carry the resulting safety objectives into the architecture and requirements.

FHA guidance · §6.2 →
02 / Examine the architecture

Make independence and exposure explicit.

Explain monitoring, fault containment and common causes. Examine significant latent failures and the assumptions about how long a failure can remain present.

Latent failures · §5.3.6 →Common cause · §7.4 →
Methods and editions need to be agreed.

Our practice uses ARP4761A and ARP4754B to organise safety assessment and systems development work. This AC refers to ARP 4761 and ARP 4754 without revision letters. Its references alone do not establish acceptance of a particular revision for a programme.

Source edition and reading coverage

75 original pages. 55 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 90e625593d472b74ec69fbcefe97649f97794410dbe844f7684b397121ac5a92

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →