FAA / Advisory circular

AC 25.1309-1B

System Design and Analysis

System design, failure conditions, analysis and the evidence supporting a system safety assessment.

Start with the scope.

Guidance for showing compliance with §25.1309. Confirm the applicable amendment level and accepted means for the programme.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Find your starting point

What are you looking into?

Go directly to a useful part of the document.

Read the source

The document, within reach.

FAA source document

Printed page 9-1

PDF page 51 of 75

FAA source text, reformatted for reading. Page boundaries and paragraph numbers are retained.

CHAPTER 9. ASSESSMENT OF MODIFICATIONS TO PREVIOUSLY CERTIFICATED AIRPLANES

9.1 Assessment of Modifications. The means to ensure continuing compliance with § 25.1309 for modifications to previously certificated airplanes should be determined on a case-by-case basis and depend on the applicable airplane certification basis and the extent of the change, in accordance with § 21.101. The change could be a simple modification affecting only one system or a major redesign of many systems, possibly incorporating new technologies. For any modification, the minimal effort for showing compliance with § 25.1309 is an assessment of the impact on the SSA, and the associated development assurance data. The result of this assessment may range from a simple statement that the existing SSA (and any associated development assurance data) still applies to the modified system in accordance with the original means of compliance, to the need for new means of compliance encompassing the plan referred to in paragraph 5.3.2 of this AC. (If the type certificate holder is unwilling to release or transfer proprietary data in this regard, then a supplemental type certificate applicant might need to create the SSA and the development assurance data covering the relevant changed parts, and parts affected by those changes, of the type design. SAE ARP 4754 guidelines may be used when making a modification to an aircraft, equipment, or item or when reusing a system, equipment, or item.) The FAA recommends that the applicant contact the appropriate certification office early to obtain agreement on the means of compliance in accordance with the latest policies (see PS-AIR-21.15-01).

9.2 Reserved.

AC 25.1309-1B · 9-1Open saved PDF here ↗

Saved from the FAA on November 16, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Connect the analysis
to the design.

A useful assessment explains why the architecture meets the safety objectives, what assumptions it relies on, and how those assumptions will be verified. We use the guidance to structure the questions and evidence around the actual system.

01 / Define the failure conditions

Begin with functions and effects.

Describe the operating context, affected functions, crew response and interactions with other systems. Carry the resulting safety objectives into the architecture and requirements.

FHA guidance · §6.2 →
02 / Examine the architecture

Make independence and exposure explicit.

Explain monitoring, fault containment and common causes. Examine significant latent failures and the assumptions about how long a failure can remain present.

Latent failures · §5.3.6 →Common cause · §7.4 →
Methods and editions need to be agreed.

Our practice uses ARP4761A and ARP4754B to organise safety assessment and systems development work. This AC refers to ARP 4761 and ARP 4754 without revision letters. Its references alone do not establish acceptance of a particular revision for a programme.

Source edition and reading coverage

75 original pages. 55 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 90e625593d472b74ec69fbcefe97649f97794410dbe844f7684b397121ac5a92

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →