FAA / Advisory circular

AC 25.1309-1B

System Design and Analysis

System design, failure conditions, analysis and the evidence supporting a system safety assessment.

Start with the scope.

Guidance for showing compliance with §25.1309. Confirm the applicable amendment level and accepted means for the programme.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Find your starting point

What are you looking into?

Go directly to a useful part of the document.

Read the source

The document, within reach.

FAA source document

Printed page 1-7

PDF page 12 of 75

FAA source text, reformatted for reading. Page boundaries and paragraph numbers are retained.

1.4.3 Policy Statements. The following policy statements are available on the FAA website at FAA Regulations and Policies and in the Dynamic Regulatory System (DRS).

• PS-ANM-25-11, Guidance for Hazard Classifications of Failure Conditions that

Lead to Runway Excursions. • PS-ANM-25-12, Certification of Structural Elements in Flight Control Systems. • PS-AIR-21.15-01, Submission of Outline of New and Changed Systems at the

Beginning of the Type Certificate Amendment Process for Transport Category Aircraft.

1.4.4 FAA-sponsored research Netherlands Aerospace Centre (NLR) reports. These reports support AC 25.1309 accepted probabilities. Copies of the referenced Netherlands Aerospace Centre reports can be obtained by sending an email to: ‘9-AVS-AIR-SSADocs@faa.gov’.

• NLR-CR-2002-601, November 2002. Assessment of standard probabilities in

support of FAA AC 25.1309, Phase one. • NLR-CR-2003-554, September 2003. Assessment of standard probabilities in

support of FAA AC 25.1309, Phase two. • NLR-CR-2005-015, January 2005. Assessment of standard probabilities in support

of FAA AC 25.1309, Phase three. • NLR-CR-2016-601, February 2017. Update of standard probabilities in support of

FAA AC 25.1309.

1.4.5 Industry Documents. The following RTCA documents are available from RTCA Inc., 1150 18th Street NW, Suite 910, Washington, DC 20036; by completing the Document Order Form and faxing it to (202) 833-9434; or at RTCA. The following SAE International Aerospace Recommended Practice (ARP) documents are available from SAE Customer Service, 400 Commonwealth Drive, Warrendale, PA, 15096; or at SAE. Please use the latest version of the referenced document.

• RTCA, Inc., Document DO-160, Environmental Conditions and Test Procedures for Airborne Equipment. • RTCA, Inc., Document DO-178, Software Considerations in Airborne Systems and Equipment Certification. • RTCA, Inc., Document DO-254, Design Assurance Guidance for Airborne Electronic Hardware. • RTCA, Inc., Document DO-297, Integrated Modular Avionics (IMA) Development Guidance and Certification Considerations. • RTCA, Inc., Document DO-326, Airworthiness Security Process Specification. • RTCA, Inc., Document DO-355, Information Security Guidance for Continued Airworthiness Global Specification.

AC 25.1309-1B · 1-7Open saved PDF here ↗

Saved from the FAA on November 16, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Connect the analysis
to the design.

A useful assessment explains why the architecture meets the safety objectives, what assumptions it relies on, and how those assumptions will be verified. We use the guidance to structure the questions and evidence around the actual system.

01 / Define the failure conditions

Begin with functions and effects.

Describe the operating context, affected functions, crew response and interactions with other systems. Carry the resulting safety objectives into the architecture and requirements.

FHA guidance · §6.2 →
02 / Examine the architecture

Make independence and exposure explicit.

Explain monitoring, fault containment and common causes. Examine significant latent failures and the assumptions about how long a failure can remain present.

Latent failures · §5.3.6 →Common cause · §7.4 →
Methods and editions need to be agreed.

Our practice uses ARP4761A and ARP4754B to organise safety assessment and systems development work. This AC refers to ARP 4761 and ARP 4754 without revision letters. Its references alone do not establish acceptance of a particular revision for a programme.

Source edition and reading coverage

75 original pages. 55 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 90e625593d472b74ec69fbcefe97649f97794410dbe844f7684b397121ac5a92

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →