Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 2/27/2014
selectable mode) should be as close to the pilot’s primary field of view as possible to
enable rapid assessment of HTAWS status and configuration. The terrain and obstacle
display should be installed in a location that provides monitoring by the pilot(s) for
identification of potential flight path conflicts. The terrain and obstacle display should be
in a location similar to other multifunction displays, such as electronic maps and
weather radar.
(3) The installation should ensure that aural alerts are distinct and audible in all
flight conditions.
(4) The certification plan should include tests and analyses to assure that the
visual and aural alerts are consistent with the alerting configuration of the rotorcraft flight
deck in which the HTAWS equipment is installed. This is particularly important with
retrofit installations, which may use previously installed alerting annunciations. The plan
should consider that visual alerts are:
(i) located in pilots’ primary field of view, and
(ii) consistent with their associated voice or aural call out.
i. Ground Test Considerations.
(1) A ground test should be conducted for each HTAWS installation. The level of
testing required will be determined by the scope of the installation (i.e., initial installation
of a HTAWS model vs. a follow-on installation of a previously installed HTAWS model
that was modified). Some items to consider for ground test should include:
(i) location of HTAWS controls, displays, and annunciators;
(ii) readability of HTAWS displays, annunciators, and alerts in all lighting
conditions;
(iii) evaluation of identified failure modes;
(iv) evaluation of all HTAWS interfaces;
(v) compatibility evaluation of HTAWS equipment lighting with previous night
vision imaging system (NVIS) lighting modifications and night vision goggle (NVG)
compatibility. Ensure the NVIS STC-approved data for the rotorcraft is updated to
reflect the installation of any annunciators or displays related to the HTAWS; and
(vi) EMI and electromagnetic compatibility (EMC) testing, and very high
frequency (VHF) harmonic tests for HTAWS with internal or external GPS receivers.
(2) Evaluate on the ground all in-flight display characteristics and interfaces that
are available during flight and that can be evaluated on the ground.
Page MG 18 - 10
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.