Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
0 AdvisoryU.S. Department
of Transportation Circular
Federal Aviation
Administration
Subject: CERTIFICATION OF NORMAL Date: 9/30/99 AC No: 27-1B
CATEGORY ROTORCRAFT Initiated by: ASW-110 Change:
______________________________________________
1. PURPOSE:
a. This is a total revision of AC 27-1A dated 7/30/97, with Change 1 dated 9/30/98, incorporated.
In addition, new material plus changes to existing paragraphs are incorporated. This consolidated
version is now renumbered as AC 27-1B and replaces AC 27-1A in its entirety. This revises existing
material in 10 paragraphs, adds new material for three paragraphs, and renumbers paragraphs to
correspond with Federal Aviation Regulations (FAR) numbering.
b. Requests from the rotorcraft industry to make the document easier to use resulted in
renumbering the AC paragraphs to correspond with FAR numbering. The figure numbers are also
renumbered accordingly.
c. This AC does not change regulatory requirements and does not authorize changes in, or
deviations from, regulatory requirements. This AC establishes an acceptable means, but not the only
means, of compliance. Since the guidance material presented in this AC is not regulatory, terms
having a mandatory definition, such as “shall” and “must,” etc., as used in this AC, apply either to the
reiteration of a regulation itself, or to an applicant who chooses to follow a prescribed method of
compliance without deviation.
d. This advisory circular provides information on methods of compliance with 14 CFR Part 27,
which contains the Airworthiness Standards for Normal Category Rotorcraft. It includes methods of
compliance in the areas of basic design, ground tests, and flight tests.
2. CANCELLATION. AC 27-1A, Certification of Normal Category Rotorcraft, dated 7/30/97, is
canceled in its entirety.
3. BACKGROUND. Based largely on precedents set during rotorcraft certification programs
spanning over 40 years, this AC consolidates guidance contained in earlier correspondence among
FAA headquarters, foreign authorities, the rotorcraft industry, and certificating regions.
4. PRINCIPAL CHANGES:
a. Chapter 3 is now titled "Miscellaneous Guidance (MG), Normal Category Rotorcraft," with the
following changes:
• Paragraphs that correspond to a FAR number are merged into existing AC text in Chapter 2.
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.