FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-36

PDF page 305 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 305
AC 27-1B · D-36Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 2                                                           4/25/06

             SUBPART D - DESIGN AND CONSTRUCTION

                     CONTROL SYSTEMS


AC 27.671.  § 27.671 CONTROL SYSTEMS --GENERAL.

     a. Explanation.

         (1) The rule requires basically that controls operate easily and smoothly and
provide positive response of the rotorcraft from control input.

         (2) In addition, the rule requires that incorrect assembly be prevented by
special design features or special markings.

     b. Procedures.

         (1) Easy, smooth operations of controls are substantiated by the operations
tests of § 27.683 and the FAA/AUTHORITY flight testing under TIA procedures.
Positive response of the rotorcraft to control inputs is also evaluated during company
flight testing and FAA/AUTHORITY TIA flight testing to the requirements of §§ 27.141
through 27.175.

         (2) To meet the requirement that incorrect assembly be prevented, the
preferred method is providing design features which make incorrect assembly
impossible. Typical design features which can be used are different lug thicknesses,
different member lengths, or significantly different configurations for each system
component. In the event that incorrect assembly is physically possible (because of
other considerations), the rule may be met by the use of permanent, obvious, and
simple markings. Permanent (durable) decals or stencils may be used.

         (3) Design features of the control systems are checked when reviewing the
type design drawings. During the proof and operation tests of §§ 27.681 and 27.683,
the controls should be thoroughly reviewed for possible incorrect assembly and for any
required markings supplied for compliance with this standard.

AC 27.672.  § 27.672 (Amendment 27-21) STABILITY AUGMENTATION,
          AUTOMATIC, AND POWER-OPERATED SYSTEMS.

     a. Explanation.

         (1) This rule requires that the pilot be made aware of stability augmentation,
automatic, or power-operated system failures which could lead to an unsafe condition.
It should be understood that this requirement applies to stability augmentation and
supplementary controls and not the primary flight control system that is dealt with under
§ 27.695 and associated advisory material. Examples of clearly distinguishable


Page D - 36

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →