Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
CHAPTER 2. PART 27
AIRWORTHINESS STANDARDS
NORMAL CATEGORY ROTORCRAFT
SUBPART F - EQUIPMENT
EQUIPMENT - GENERAL
AC 27.1301. § 27.1301 FUNCTION AND INSTALLATION.
a. Explanation. It should be emphasized that this rule applies to each item of
installed equipment including optional as well as required equipment.
b. Procedures.
(1) Information regarding installation limitations and proper functioning is
normally available from the equipment manufacturers in their installation and operations
manuals. In addition, some other paragraphs in this AC include criteria for evaluating
proper functioning of particular systems. (An example is paragraph AC 27 MG 1 for
avionic equipment.)
(2) This general rule is quite specific in that it applies to each item of installed
equipment. It should be emphasized, however, that even though a general rule is
relevant, a rule that gives specific functional requirements for a particular system will
prevail over a general rule. Therefore, if a rule exists that defines specific system
functioning requirements, its provisions should be used to evaluate the acceptability of
the installed system and not the provisions of this general rule. It should also be
understood that an interpretation of a general rule should not be used to lessen or
increase the requirements of a specific rule. Section 27.1309 is another example of a
general rule, and this discussion is appropriate when applying its provisions.
(3) For optional equipment, the emphasis on functioning is rather limited
compared to that for required equipment. The conditions under which the optional
equipment is evaluated should be recorded in the type inspection report. The major
emphasis for this type of equipment should be to ensure it does not interfere with the
operation of systems that are required for safe operation of the rotorcraft, and that the
failure modes are acceptable and do not create any hazards.
AC 27.1303. § 27.1303 FLIGHT AND NAVIGATION INSTRUMENTS.
NOTE: The EFIS guidance material provided in this section is not directly related to a
showing of compliance with § 27.1303. The material will be moved to a new AC 27
EFIS MG section at the next revision.
Page F - 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.