FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page F-2

PDF page 560 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 560
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                           2/12/03

     a. Explanation. This rule lists the flight and navigation instruments that are
required for VFR operation. Additional rules to be used when determining compliance
for the flight and navigation instrument installation for rotorcraft are § 27.1321,
Arrangement and Visibility, and Part 27, Appendix B, paragraphs VIII(a) and (b), for IFR
operation considerations. Additional information regarding the different instruments can
be found by referring to the Technical Standard Order (TSO) for each one. Compliance
with the TSO requirements does not ensure compliance with the appropriate Part 27
installation requirements. Other considerations may also be found by reviewing the
requirements of §§ 27.1323, 27.1327, 27.1335, 27.1381, 27.1543, 27.1545, and
27.1547.

     b. Procedures.

         (1) The following instruments are the required minimum flight and navigation
instruments for VFR:

                  (i)   Airspeed indicator.

                   (ii)   Altimeter.

                    (iii)   Magnetic Direction Indicator.

If additional instruments are required per other considerations, then evaluation will take
place to determine appropriateness.

         (2) Refer to Part 27, Appendix B, paragraphs VIII(a) and (b), for IFR operation
considerations.

         (3) If a speed warning device is required to be included as part of the rotorcraft
design, it must meet the performance requirements given in the rule. In addition, the
evaluation of the acceptability of the aural warning (i.e., this warning differs distinctively
from aural warnings used for other purposes) should be accomplished by flight test
personnel as part of their overall evaluation.

         (4) Electronic Flight Instrument Systems (EFIS).

                  (i)    Explanation. The increased use of microprocessor technology in
avionic systems has resulted in the use of computer-generated graphics to replace
conventional electromechanical instruments, which are used for the display of flight
information required by § 27.1303. For IFR certified aircraft, the EFIS usually is used
for the display of the magnetic gyro-stabilized direction indicator (slaved compass
system). These computer-generated graphics are usually displayed on small
multicolor-shadow-mask cathode ray tubes (CRT) or liquid crystal displays (LCD), and
replace the horizontal situation indicator (HSI) and the attitude direction indicator (ADI).
This section presumes that the EFIS for which approval is sought meet the general
requirements of an EFIS for a technical standard order or a small category airplane with


Page F - 2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →