Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
AC 27-1B
APPENDIX A
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
Instructions for Continued Airworthiness (ICA) are required by Federal Aviation Regulations
(FAR)/Joint Airworthiness Regulations (JAR) § 27.1529. Appendix A to FAR/JAR Part 27
specifies the requirements for Instructions for Continued Airworthiness. The following 70 pages
for this AC 27-1B, Appendix A, provide a template for the ICA. This ICA Template was
prepared to assist applicants in preparing an ICA for their type design change to rotorcraft.
The guidance is intended for applicants that are required to comply with FAR/JAR § 27.1529 to
prepare Instructions for Continued Airworthiness acceptable to FAA/AUTHORITY.
The ICA Template contains requirements of Appendix A to FAR/JAR Part 27, identified by bold
type. The bold type requirements are to be included in the applicant Instructions for Continued
Airworthiness as applicable to the applicant’s type design change. Items in regular type are not
required by FAR/JAR; however, these items are an aviation industry standard and are found in
most current Instructions for Continued Airworthiness. The underlined words and sentences are
to emphasize the information. It is recommended the applicant include those in their ICA for
standardization and clarity.
The ICA Template is arranged as a sample Instructions for Continued Airworthiness document
and can be used as a template for the preparation of the applicant’s Instructions for Continued
Airworthiness. The ICA Template was prepared to cover a complete rotorcraft. The applicant
for a type design change need not include all information for the appropriate type design, only
the applicable information to their type design change.
Appropriate text in regular type can be copied from the ICA Template. Text in italics and the
appendices are for instructions and are not to be copied.
The ICA Template is formatted using the Airline Transport Association (ATA) Chapter
numbering system. The ATA Chapter format is not required; however, it is recommended. The
ATA chapter numbers that are not listed in this document do not relate to ICA’s and are not used
in the ATA system for ICA’s (Maintenance Manual). The Standard Practices chapters are
broken out separately from the other listed chapters because they are not a requirement.
However, Standard Practices are an industry standard and are found in most industry
Maintenance Manuals.
Page Apdx A - 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.