Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
Advisory0 U.S. Departmen1
ofTransportation Federal Aviation Circular
Ad,nlnistrotton
Subject: CERTIFICATION OF NORMAL Date: FEB 4 2016 AC No: 27-1B
CATEGORY ROTORCRAFT Initiated by: ASW-1 IO Cban~e: 7
1. PURPOSE.
a. This change publishes needed changes to the existing material and adds Miscellaneous
Guidance (MG) sections to the Advisory Circular (AC).
b. The change number and the date ofthe changed material are shown at the top ofeach
page. The vertical lines in the outside margin indicate the beginning and end ofeach change.
Pages that have different page numbers, but no text changes, will retain the previous heading
information.
2. PRINCIPAL CHANGES.
a. This change 7 includes changes, edits, and additions for these AC sections: 27.865B,
27.1321. 27 MG 1, 27 MG 16, and 27 Appendix B.
b. This change adds to this AC ihe following MG sections: AC 27 MG 19 (Guidance on
Electronic Display Systems (EDS) for Rotorcraft Installations), AC 27 MG 20 (Human Factors
(HF)), and AC 27 MG 21 (Guidance on Creating a System Level Functional Hazard Assessment
(FHA)).
3. WEBSITE AVAILABILITY. To access this AC electronically, go to the Advisory
Circular 1library at http://www·.faa.gov/regulations policies/advisory circulars/.
f~
a , Rotorcraft Directorate,
Aircraft Certification Service
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.