FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page D-35

PDF page 304 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 304
AC 27-1B · D-35Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B


         (3) The probable ranges of damping must be established and investigated as
prescribed and noted in paragraph AC 27.663(b). An approved test proposal and test
results report should be used for complying with § 27.663(b).  If wheel landing gear is
used on the rotorcraft, the probable ranges of tire pressure or the lowest probable tire
pressure should be stated in the test proposal and effects of the tire pressure
investigated during the test. See paragraph AC 27.241, § 27.241, concerning tests and
instrumentation of the test associated with complying with § 27.241. The
instrumentation noted in paragraph AC 27.241 also applies to § 27.663(b).

         (4) If the wheel landing gear is equipped with wheel brakes, the evaluation
should include brakes “on” and “off.” The nose or tail wheel should be locked and
unlocked if it swivels to evaluate any possible adverse effects of this feature.

         (5) Any maintenance procedures should be included in the “recommended” part
of that manual. See Appendix A, FAR Part 27.

AC 27.663A  § 27.663 (Amendment 27-26) GROUND RESONANCE PREVENTION
           MEANS.

     a. Explanation. Amendment 27-26 clarifies that analysis as well as tests may be
used to show freedom from ground resonance after malfunction or failure of a single
means of ground resonance prevention. This amendment primarily clarifies that the
probable range of damping should be established as well as investigated.

     b. Procedures. The procedures of paragraph AC 27.663 continue to apply with
the addition of the need to document the establishment of the probable range of
damping of ground resonance prevention means. Acceptable tire and oleo minimum
and maximum pressures as well as other identified factors should be documented in
maintenance instructions if necessary to maintain the desired characteristics.





                                                       Page D - 35

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →