Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 2/27/2014
(ii) visual information depicting obstacles, relative location of obstacles, and
obstacle avoidance alerts; and
(iii) aural terrain and obstacle avoidance alerts.
(2) Although TSO-C194 and RTCA DO-309 do not require a reduced protection
mode, TSO applicants should consider providing a mode that will account for off-airfield
operations that will still provide the pilot with essential alerts regarding terrain while
minimizing nuisance alerts. Without a reduced protection or similar mode, nuisance
alerts may lead to pilots ignoring or inhibiting the HTAWS at inappropriate times.
(i) Reduced protection mode performance should be evaluated during the initial
airworthiness certification.
(ii) Reduced protection mode should always provide an alert with sufficient time
to avoid terrain or obstacles.
(3) Flight evaluations of systems have revealed that reduced protection or similar
modes for terrain alerting functions are important in rotorcraft operations. Operations
into off-airfield and unimproved landing zones usually trigger nuisance alerts if a
reduced mode is not provided. These modes usually decrease the vertical and
horizontal alerting envelope over terrain and obstacles thereby reducing time to collision
alerts. TSO-C194 and RTCA DO-309 do not require a reduced protection mode.
Applicants with systems that have a reduced protection mode with terrain and obstacle
alerting envelopes different from those in the normal mode, should provide for sufficient
alerting and clearance from terrain and obstacles when conducting visual
meteorological conditions operations.
f. Airworthiness Considerations.
(1) The scope of the applicant’s program should be directed toward airworthiness
approval through the type certification (TC), amended TC, or supplemental type
certificate (STC) processes. Installation of the HTAWS when integrated with other
systems and equipment may result in a significant change under the changed product
rule, 14 CFR 21.101. Installation of HTAWS in legacy aircraft may require meeting the
current regulations that address installation of these newer technologies.
(2) The remainder of this document provides airworthiness considerations that
applicants should consider as part of the certification process.
Page MG 18 - 6
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.