FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 993

PDF page 993 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 993
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/27/2014                                      AC 27-1B, Chg 4


      (7) Hazardously Misleading Information (HMI): An incorrect depiction of the terrain
or obstacle threat relative to the rotorcraft during an alert condition (excluding source
data). This means that the HTAWS alert information presented in the cockpit is in error
relative to information contained in the terrain or obstacle database.

      (8) HTAWS: A generic term used to describe an alerting system that provides the
flight crew with sufficient information and time to detect potentially hazardous terrain or
obstacle.

      (9) Integrity: Attribute or reliability of a system or a component that can be relied
upon to function at a level that is commensurate with the criticality determined by the
functional hazard assessment (FHA).

     (10) Maneuver: A change in the flight path of the aircraft initiated by the flight crew
in response to an HTAWS alert to include climbs, descents (inappropriate for most
situations), and turning procedures.

     (11) Nuisance Alert: An alert that occurs when there is no threat or is unnecessary
for the intended operation.

     (12) Obstacle: A human-made structure that is in the flight path of the rotorcraft.

     (13) Reduced Protection Mode: A reduced warning algorithm state that allows
operation closer to terrain and obstacles with minimal alerts.

     (14) Terrain and Obstacle Database: Terrain and obstacle information stored
within an HTAWS.

     (15) Unannunciated Failure: A form of hazardous misleading information that is
particular to warning systems, such as HTAWS.

     (16) Visual Alert: The use of projected or displayed information to present a
condition, situation, or event to the flight crew.

     (17) Warning Alert: An alert for a detected terrain or obstacle threat that requires
immediate flight crew attention and decision.

   e. System Description.

      (1) The HTAWS will assist rotorcraft pilots in maintaining awareness of their
proximity to terrain and obstacle hazards. HTAWS takes inputs from a horizontal
position source, vertical position source, terrain database, and an obstacle database.
The HTAWS is typically designed to provide the following high level functions:

            (i) visual information depicting terrain, relative location of terrain, and terrain
avoidance alerts;


                                                     Page MG 18 - 5

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →