Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 2/27/2014
Publication Title
Environmental Conditions and Test Procedures for DO-160 Airborne Equipment.
Minimum Performance Standards - Airborne Ground DO-161A Proximity Warning Equipment.
Software Considerations in Airborne System and DO-178 Equipment Certification.
Design Assurance Guidance for Airborne Electronic DO-254 Hardware.
DO-200A Standards for Processing Aeronautical Data.
Minimum Operational Performance Standard (MOPS)
DO-309 for Helicopter Terrain Awareness and Warning System
(HTAWS) Airborne Equipment.
(ii) The Society of Automotive Engineers (SAE) Aerospace Recommended
Practices documents listed below are available from SAE Customer Service, 400
Commonwealth Drive, Warrendale, PA 15096-001.
Publication Title
SAE ARP Certification Considerations for Highly Integrated or
4754A Complex Aircraft Systems.
Guidelines and Methods for Conducting the System SAE ARP Safety Assessment Process on Civil Airborne Systems 4761 and Equipment.
d. Definitions.
(1) Alert: A visual or aural stimulus presented either to attract attention or to
convey information regarding system status or condition, or both.
(2) Aural Alert: A verbal statement used to annunciate a condition, situation, or
event.
(3) Caution Alert: An alert requiring flight crew awareness. Subsequent corrective
action will normally be necessary.
(4) Failure: The inability of the equipment or any subpart of that equipment to
perform its intended function within previously specified limits.
(5) False Alert: A warning or caution that occurs when the designed terrain or
obstacle warning or caution threshold of the system is not exceeded.
(6) Hazard: A state or set of conditions that, together with other conditions in the
environment, could result in an adverse safety impact.
Page MG 18 - 4
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.