Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
• Check windshield, windows, and chin bubble windows for suitability (e.g., scratches,
crazing, cleanliness).
• Check filter condition for fogging, crazing, cracking, etc., which impairs unaided
readability of the instrument or gauge to which the filter is applied.
• Check NVIS lighting for light leakage and compatibility.
• NVG adjustment and alignment.
• Check function of additional NVIS equipment.
• Interior configuration check for NVIS equipment (e.g., deselect incompatible light
sources).
• Exterior configuration check for NVIS equipment (e.g., position lights, taxi and landing
light, search light are selected to correct mode, if applicable).
• Adjust lighting as required.
4.1.2 In-flight.
• Control of cockpit and external NVIS illumination. Adjust lighting, as required.
• Transition to aided from unaided operations (and vice versa), as necessary.
• Radar altimeter and additional equipment procedures, as necessary.
4.1.3 Post flight. Report NVIS lighting or equipment and windscreen/transparency discrepancies.
5. WEIGHT AND BALANCE. The weight and balance should include the installation of NVIS
equipment. Provide a sufficiently detailed system description. Refer to AC 43.13-1B, Chapter 10
for additional guidance.
(End of the section of one template for use as an RFMS.)
Page MG 16-15
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.