Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 7 2/4/2016
h. Instructions for Continued Airworthiness (ICA).
(1) General. ICA must contain the information necessary for carrying out ongoing maintenance
and inspections on NVIS equipment installed in the rotorcraft. Refer to section AC 27.1529 and Appendix
A of this guidance RTCA Document DO-275, section 5.5 also contains information related to the
development of NVIS lighting ICA’s, At a minimum, the following should be included:
(i) Appliance, system or accessory maintenance manual, or section.
(ii) Maintenance Instructions and Inspection Requirements. Ensure that the ICA instructions
are clear on whether the operator must remove the filter or other NVIS modification prior to returning an
instrument, gauge, or light to the manufacturer for maintenance. Ensure the ICAs have sufficient
instructions on how to de-modify and re-modify instruments and gauges. Additionally, we recommend
periodic inspections to ensure the NVIS lighting system is still NVG compatible and the configuration of
the aircraft still agrees with the approved data. One acceptable method is the inclusion of an annual or
time-interval inspection procedure..
(iii) Airworthiness Limitations.
(iv) Illustrated Parts Breakdown. The ICA should cover (as a minimum) aircraft
transparencies (windscreen, windows, etc.), NVIS lighting, and any additional aircraft equipment that
support NVIS operations. The NVG manufacturer should have ICA and maintenance schedules for its
goggles that the operator should follow.
(v) It is recommended that a storage location or compartment is provided on the aircraft to
protect the continued airworthiness of the NVGs. However, storing the NVGs in a location that could
cause damage to the aircraft or an aircraft component, hinder crashworthiness, or result in loss of the
intended function of a component is prohibited.
(2) Modifications or Maintenance.
(i) Post - Type Certificate (TC) or STC Approved Modifications. Any subsequent aircraft
modifications (internal or external), including operational equipment (FLIR, EMS equipment, etc.)
involving a light emitting or reflecting device should be considered major since it could affect the
operational characteristics of the NVIS lighting system and should be re-assessed against the original
requirements for the NVIS certification.
(ii) Multiple TC or STC Approvals. If an approval is granted for multiple aircraft, installation
and production procedures should ensure all aircraft comply with the type design. Provide this
information in the initial certification data package so that the FAA knows it is intended for multiple
approvals. The production procedures should be sufficiently detailed to detect minor differences between
the different aircraft. Expect that post-production tests will include the ground and flight tests described
above for each individual aircraft.
(iii) STC and Type Certificate Data Sheet (TCDS) verbiage: The following verbiage was
developed to help with f.(2)(i) and f.(2)(ii) above and should be included in the “Limitations” section of the
STC and the TC TCDS:
“Any deviation from the cockpit or cabin configuration specified in the STC or TC Type Design may
affect the compatibility of the NVIS and will require a re-evaluation for NVIS cockpit and NVG
compatibility. The aircraft is not certificated for NVG operations until the evaluation is completed.”
Note: Find the NVIS/NVG cockpit evaluation guides/checklists at
http://www.faa.gov/aircraft/air_cert/design_approvals/rotorcraft/nvis.
Page MG 16-16
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.