FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 974

PDF page 974 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 974
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                       2/4/2016


                      (2) Glare is an indication of an NVG-incompatible energy emission. Glare can result
from poorly filtered or fitted lighting. Assess light sources causing glare and develop mitigating solutions
to keep them from interfering with the pilots’ view through NVGs.

                (D) External light sources.

                      (1) Assess external light glare and reflectivity during the night flight for both unaided
and aided operations. Evaluating the effects of glare and reflections that interfere with NVGs from
external aircraft lighting is very important when operating in remote, dark areas. There are NVIS lighting
position and anti-collision lights available. Consider using them if operations are conducted in very dark
areas where there is little to no ambient cultural lighting.

                      (2) Methods to reduce glare or reflections caused by external aircraft lighting depend
on where the light enters the cockpit and what aircraft structure reflects the light. For example, light that
reflects off skids or wire cutters might be mitigated by using non-reflective paint on the reflecting surfaces.
If using physical barriers or baffle materials to block glare from entering the cockpit, pay particular
attention to restrictions in the pilot's field-of-view through the chin bubble, particularly during take-off,
landing, and hover operations. Also, pay attention to the potential of the mat or baffle moving or
dislodging during flight, thereby causing interference with the tail rotor pedals or other aircraft controls.

                      (3) Use of blocking methods should be evaluated during both ground and flight test.

Note:    It is possible that a non-compatible landing light used for NVG aided landings, which was found to
       be acceptable when landing on grass or a dark surface (e.g., asphalt), could cause unacceptable
         reflections when used over a light-colored concrete surface. For this reason, evaluate the effect
         of the light’s reflection off of various ground surfaces such as asphalt, concrete, etc., over which
        the aircraft may operate.

                      (4) Evaluate external light sources that pilots could use to assist them with NVG flight
for their effect on NVG performance. Assess any installed landing lights, searchlights, etc., to determine
their effect on the aided visual range. For instance, if the pilot uses a searchlight or landing lights to help
assess a landing area or while landing with NVGs, then the light’s effect on the range of vision within and
beyond the light boundaries should be evaluated and documented.

                      (5) During integration evaluations, record sources of non-compatible light glare and
reflections and any mitigating strategies developed.

        (12) Ground and flight tests.

                  (i) The purpose of FAA certification tests is to verify that the rotorcraft meets the certification
requirements for both aided and unaided operations. Testing will include a ground and flight assessment
of crew stations to ensure that the crew can use all systems for both aided and unaided operations.
These assessments may result in changes to the limitations or operating procedures in the RFMS.

                    (ii) Prior to requesting FAA certification flight tests, the applicant should submit the
certification plan, ground and flight test plans, and type design details (to include relevant data, drawings,
bench tests, component tests, environmental qualifications, installation configurations, and test equipment
and calibration) that were used to demonstrate compliance with the requirements. It is highly
recommended that the applicant and installer perform ground day, night, and NVG-aided evaluations prior
to the FAA’s evaluations.

                     (iii) Ground and flight test plans should include the types of operations for which the applicant
intends to use the aircraft. For instance, dual pilot operations or training will require both a right and left
pilot seat evaluation. Emergency medical service (EMS) aircraft, for example, require an evaluation of
visibility within the passenger compartment and the adequacy of cockpit protection from passenger
compartment lighting if those lights are not NVG compatible.


Page MG 16-10

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →