Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
(A) NVIS lighting.
(B) Helmet with suitable NVG mount for each pilot and crewmember required to use
NVGs.
(C) NVGs for each pilot and crewmembers required to use NVGs.
(D) Radar altimeter with suitable low height and failure indications.
Note: For applicants who want EASA to validate their STCs, the applicant may want to notify the
operator that a digital readout only radar altimeter will not meet EASA requirements and that the
operator should ensure installation of the appropriate radar altimeter.
(E) Slip/Skid indicator.
(F) Gyroscopic attitude indicator.
(G) Gyroscopic direction indicator or equivalent.
(H) Vertical speed indicator or equivalent.
(I) Communications and navigation equipment necessary for the successful completion of
an inadvertent IMC procedure in the intended area of operations.
(J) Any other aircraft or personal equipment required for the operation (e.g., curtains,
NVG stowage, extra batteries for NVGs).
(ii) The mounting position of all instruments, switches, position labels, and controls should be
visible to the pilot during unaided and aided flight and in all cockpit lighting conditions (day and night).
Instruments required for NVG operations should be located in or as close as possible to the pilot’s
primary scan. For example, a radar altimeter, which is required for NVG operations, should be located as
close as possible to the primary instrument cluster. Locating the radar altimeter on the opposite side of
the instrument panel increases the pilots’ scan and workload. The instruments, switches, and placards
should be free from reflections. Warning, caution, and advisory annunciation devices should be
conspicuous, NVG compatible, and clearly visible to the pilot (day and night). Gauge and instrument
markings should be clearly seen and the colors of the markings maintained. Limited NVG visual
degradation of one element on the USAF Tri-Bar chart (12%) is allowed for master caution, master
warning, and warning messages or annunciators since these lights need to attract the pilot’s attention.
Other than master caution and warning lights and warning annunciators, no other light or reflection in the
cockpit may degrade NVG visual acuity from the acuity measured viewing the target through the
windscreen. Find a copy of the USAF Tri-Bar chart in the checklists at:
http://www.faa.gov/aircraft/air_cert/design_approvals/rotorcraft/nvis/.
(iii) Interior Lighting. Internal lighting systems should not adversely affect the performance of
the NVG. NVIS-modified instrument lights, illuminated instrument markings and applicable signs must
comply with § 27.1381. Compliance should be demonstrated during both aided and unaided operations. .
In past applications, the use of NVIS White provided good color discrimination on instrument markings. If
a piece of equipment, instrument, switch, indicator, or panel was illuminated prior to the NVIS lighting
installation, it should be illuminated by the NVIS lighting modification. Shades of red, amber, or green in
the cockpit that are difficult to distinguish as red, amber, or green in all lighting conditions are not
acceptable since pilots must be able to readily distinguish all aircraft cautions, warnings, advisories, and
instrument markings without confusion. Similarly, NVG filtering should not result in different colored
illuminations becoming difficult to distinguish from each other. For example, when using amber for
cautions, the NVIS filtering should not result in amber caution lights and green advisory lights appearing
similar in color. Because technology is available that allows “NVG-friendly” reds to appear red without
interfering with Class B NVGs, the use of NVIS-Red (which appears orange or amber to the eye) is not
Page MG 16-7