FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 962

PDF page 962 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 962
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                         2/12/03

              (A) Control and operating instructions must be provided for each element
of HUMS, and where applicable, include data acquisition, transfer processing, display,
configuration management, and resulting actions.

              (B) Acceptance and rejection criteria and associated actions must be
defined.

             (C) A procedure is required when the system becomes inoperative
because data is missing.

             (D) When required, there must be a procedure for collecting and
transferring HUMS data when the aircraft is away from the main HUMS data processing
base.

              (E) Provide a procedure for independent verification as defined in
paragraph f(3), if applicable.

              (F) Provide a procedure for implementing mitigating actions, when
mitigating actions are applied.

            (G) Provide a procedure for implementing controlled introduction to
service instructions as defined in paragraph g(4), if applicable.

             (H) Provide a training program on HUMS airborne and ground based
systems and equipment.

                   (I)  The airworthiness limitation section must be amended to address the
following, if required:

               (1) Requirements for independent verification and associated procedures.

               (2) Requirements for mitigation actions and associated procedures.

               (3) Requirements for controlled introduction to service and associated
procedures.

                   (ii)   Ground Based System and Equipment. A procedure must be defined
to ensure the security of the ground-based system and equipment and the integrity of
the HUMS data.

         (2) Owner/Operator's HUMS Program.

                  (i)    General. An owner/operator that installs and utilizes health and usage
monitoring equipment on aircraft and intends to request maintenance credit will need a
program. This program and revision to existing maintenance and/or inspection
programs must be submitted to the aviation Authority for approval. This is due to the


Page MG 15 - 16

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →