Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
fact that maintenance credit may change existing maintenance inspection, overhaul
requirements, and/or life limits.
(ii) HUMS Program Items. Regardless of the size and complexity of the
health and usage monitoring equipment, the HUMS program must contain the following:
(A) A system must be provided for tracking the HUMS monitored
component/system, including identification of component/system, recording
requirement, tracking procedure, and other related activities.
(B) A system to assure that a maintenance credit must be maintained.
The historical HUMS data must be traceable when such components/assemblies are
transferred between aircraft.
(C) A procedure for new or overhauled HUMS monitored components.
(D) A procedure to address inoperative HUMS in accordance with
paragraph j(1)(i)(C).
(E) A means for implementing procedures specified in paragraph j(1)(ii).
(F) A procedure for adjusting maintenance credits.
(G) An organization with clearly defined responsibilities to collect, analyze,
and act upon the HUMS data.
(H) A procedure for implementing the training program specified in
paragraph j(1)(i)(H).
(I) Where appropriate, a procedure for implementing the controlled
introduction to service plan. See section g(4), Controlled Introduction to Service.
(iii) Ground Based System and Equipment.
(A) A procedure for troubleshooting and testing of the HUMS.
(B) A procedure for revising and using the operator’s Minimum Equipment
List (MEL) for HUMS.
(iv) Master Minimum Equipment List (MMEL)/Minimum Equipment List.
(A) The MMEL may need to be revised to include the HUMS equipment.
Once the MMEL contains the HUMS equipment, the operator can revise their MEL to
include HUMS and submit the MEL to the aviation Authority for approval.
Page MG 15 - 17
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.