Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
(4) Application(s): A HUMS process implemented for a distinct purpose(s).
(5) Criticality (1309): This term describes the severity of the end result of a
HUMS application failure/malfunction. Criticality is determined by an assessment that
considers the safety effect that the HUMS application can have on the aircraft. There
are five criticality categories as follows:
(i) Catastrophic: Failure conditions, which would prevent continued safe
flight and landing.
(ii) Hazardous/Severe Major: Failure conditions, which would reduce the
capability of the aircraft or the ability of the crew to cope with adverse operating
conditions to the extent that there would be:
(A) A large reduction in safety margins or functional capabilities,
(B) Physical distress or higher workload such that the flight crew could not
be relied on to perform their tasks accurately or completely, or
(C) Adverse effects on occupants including serious or potentially fatal
injuries to a small number of those occupants.
(iii) Major: Failure conditions which would reduce the capability of the
aircraft or the ability of the crew to cope with adverse operating conditions to the extent
that there would be, for example, a significant reduction in safety margins or functional
capabilities, a significant increase in crew workload or in conditions impairing crew
efficiency, or discomfort to occupants, possibly including injuries.
(iv) Minor: Failure conditions which would not significantly reduce aircraft
safety, and which would involve crew actions that are well within their capabilities. Minor
failure conditions may include, for example, a slight reduction in safety margins or
functional capabilities, a slight increase in crew workload such as routine flight plan
changes, or some inconvenience to occupants.
(v) No-Effect (Non-hazardous class): Failure conditions which do not
affect the operational capability or safety of the aircraft, or the crew workload.
(6) Integrity: Attribute of a system or a component that can be relied upon to
function as required by the criticality determined by the Functional Hazard Assessment
(FHA).
(7) Mitigating Action: An autonomous and continuing compensating factor
which may modify the level of qualification associated with certification of a HUMS
application. This action becomes a part of the certification requirements and, as such,
Page MG 15 - 3
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.