FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 943

PDF page 943 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 943
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                        AC 27-1B, Chg 1

shaft should be contained or otherwise prevented from interfering with the drive system
or flight controls. Similarly, a failure of the compressor or drive belts should not damage
the drive system or interfere with the flight control mechanism.

         (5) The mechanically-driven compressor should not adversely affect the
(vibration) dynamic characteristics of the drive system in any operating condition
(§ 27.907(c)). Maximum vibration levels should be given in engine/drive system
installation data (§§ 27.901(b) and 27.927(a)).

      h.  Flight Analyst/Pilot Considerations.

Update Rotorcraft Flight Manual supplements (RFM) to show performance effects.  If
the installation is such that it interferes with engine inlet airflow, then determine any
performance loss, evaluate inlet distortion, and validate turbine engine operating
characteristics. Reference §§ 27.45 and 27.939. TIA should include operational tests
such as intended function and abnormal/emergency operation. Conduct EMI tests and
evaluate the RFM supplement. Reference §§ 27.1581, 27.1583, 27.1585, and 27.1587.

         i.  Safety Devices / Failure Mode Effect Analysis

         (1) SAFETY DEVICES:

                  (i)   Automatic Load shedding
                   (ii)   Current Limiter
                    (iii)  Compressor Temperature Limiter
               (iv)  Compressor Electric Motor temperature limiter
              (v)   Compressor Discharge pressure limiter
               (vi)   Oil separator / Injector
                (vii)  Containment shrouds
                 (viii)  Belt guard
               (ix)  Pressure line gallery cover
              (x)    Ignition source protection (Freon is flame suppressant)

         (2) FAILURE MODE EFFECT ANALYSIS: A Failure Mode Effect Analysis is
crucial to the safety evaluation of the systems. Consider the areas given below:

                  (i)   The overpressure safety system assures there is a means to shut the
system down prior to a critical pressure developing (overpressure switches, blowout
plugs, redundant circuit breakers, etc.).

                   (ii)  An electrical load analysis should show that the failures in the air
conditioning system do not jeopardize the safe operation of flight essential and flight
critical airborne systems.

                    (iii)   For systems driven by engine/transmission/drive shaft, a powerplant
evaluation should be made to determine power available, vibration characteristics, etc.


                                                       Page MG 14 - 5

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →