FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 944

PDF page 944 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 944
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                           2/12/03


               (iv)   Coupling/drive belt failure and its effect on adjacent components.

              (v)  The area around the condenser and receiver dryer (and any other
high-pressure components) to determine if there are any critical components in the
vicinity that could be damaged if a burst line occurs.

               (vi)  Assure that the Condenser blower/fan construction is such that if the
fan or impeller fails, the pieces will not damage other components or helicopter structure
(§ 27/29.1461).

                (vii)  The design should be such that Freon leakage cannot be ingested
into the engines (§ 27.1309). Freon is an excellent fire suppressant. Ensure that no
pressure relief valve or blow out plug (on the receiver dryer) is located inside the cabin.
Quantities of Freon should also be prevented, as much as possible, from entering the
cabin in the event of a leak. The rapid expansion of liquid Freon to its gaseous state in
the close proximity of the flight crew could be disconcerting (could fog up the cabin).
Liquid refrigerant, if allowed to strike the body, could cause frostbite, and if allowed to
strike the eye, can cause blindness.





Page MG 14 - 6

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →