Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 1 2/12/03
Suggested Compliance Checklist: R=Report, D=Drawing, T=Test (continued)
REGULATION SUBJECT METHOD
27.605 Fabrication methods D
27.607 Fasteners D
27.609 Protection of Structure R
27.613 Material Strength R
27.685a,c Control system details D
27.831 Ventilation R
27.853 Compartment interiors (a, b, c) T
27.855 Cargo compartments (a, b) D
27.863 Flammable fluid protection D
27.1301 Function and Installation T
27.1307 Miscellaneous Equipment, 27(c, e) D
27.1309 Equipment systems and Installation R
27.1435 Hydraulic system T
27.1461 Equipment containing High energy rotors D, R
27.1541 Markings and placards D
d. Electrical System Considerations
(1) An electrical wiring diagram showing interconnections of all electrical
components should be provided. The wiring diagram should show adequate circuit
protection (circuit breakers). It should also indicate the use of wiring of adequate size
and length to take maximum currents to which the system would be exposed. Power to
air conditioning electrical system should be connected to an electrical power source that
provides adequate power and does not interfere with essential electrical loads and
provides solid electrical ground to airframe.
(2) An electrical load analysis should be provided to demonstrate the
availability of adequate current to the air conditioning system from the helicopter
electrical power source during all phases of flight and system operation. The system
should also be powered from the helicopter electrical power source that provides
adequate power and does not interfere with essential electrical loads.
(3) The air conditioning system should be capable of a successful functional
test and electromagnetic compatibility test. It needs to be shown that air conditioning
equipment will not be a source of interference with the essential equipment. Reference
§§ 27.1351(a)(b), 27.1357, 27.1365, and 27.1367.
e. Structural Considerations
(1) Overall aircraft structure should be substantiated for the increased weight of
the air conditioner modification. Each air conditioner component, its backup structure,
and its attachment to the aircraft structure should be substantiated to the strength
Page MG 14 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.