Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
CHAPTER 3
AIRWORTHINESS STANDARDS
NORMAL CATEGORY ROTORCRAFT
MISCELLANEOUS GUIDANCE (MG)
AC 27 MG 14 CERTIFICATION PROCEDURE FOR INSTALLATION OF VAPOR
CYCLE AIR CONDITIONING SYSTEMS.
a. FAA/AUTHORITY Approval Philosophy. The vapor cycle (Freon) air conditioning
system is generally considered "nonessential"; that is, its function is not necessary for safe
flight. Therefore, the FAA/AUTHORITY looks at it from the standpoint of its potential of
posing a hazard to the aircraft in the course of its normal function/malfunction or in case of
a failure. 14 CFR Part 27.1309 thus becomes the dominant regulation concerning the
system. However, if an air conditioning system is required for electrically powered
equipment cooling, then a criticality assessment may show that the criticality level may be
higher than nonessential.
b. Type of Refrigerant/Regulations/Environmental Impact.
(1) The refrigerant commonly used in automobiles and aircraft is known as
Freon R-12 (home air conditioners use R-22). This Freon is one of the
CHLOROFLUROCARBONS (CCl F) or CFCs. This compound is blamed for eroding
the ozone layer in the Stratosphere (the chlorine in CFCs attacks and destroys the
ozone molecules). The U.S. Clean Air Act restricts the production of CFCs. In 1992,
production was restricted to 50%. The United States and most other industrial countries
have agreed to phase out CFC production by 1995. CFC is prohibited beginning in the
year 2000. Beginning in June 1992, CFCs required recovery.
(2) The new refrigerant HYDROFLUROCARBONS (CH FCF) HFC-134a or
R-134a does not deplete ozone. Automobile industries as well as some small aircraft
manufacturers are designing air conditioning systems with this non-ozone-depleting
refrigerant. This HFC-134a is currently available and manufactured by the Dupont
Company.
c. Suggested Compliance Checklist: R=Report, D=Drawing, T=Test.
REGULATION SUBJECT METHOD
27.301 Loads R
27.303 Factor of safety R
27.305 Strength & Deformation R
27.307 Proof of structure R
27.561 Emergency Landing conditions R
27.603 Materials and Workmanship D
Page MG 14 - 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.