FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 912

PDF page 912 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 912
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                           2/12/03

             (D) Caution should be exercised in the application of the analytical
method above, particularly when the following items are involved:

               (1)  Irregularly shaped parts containing numerous or super-imposed fillets,
holes, threads, or lugs.

               (2) Large parts in proportion to the laboratory specimens.

               (3) Parts or unique design for which no past service experience is
available.

               (4) Parts subject to fretting.

               (5) Bolted or pinned connections.

               (6) Complex castings.

               (7) Welded sections.

               (8) New materials or processes without precedent of use.

                   (ii)   Rational methods. The previous simplified method can be overly
conservative, especially when only ground-air-ground cycles or very high loads
associated to very low occurrences fall over the operating boundary line defined in
paragraph e(2)(i) above. Consequently methods may be used which do not involve full
scale testing but which apply the same principles of calculation of retirement times,
based on:

              (A) An S/N curve shape representative of the material of the component.

              (B) A mean fatigue limit representative of the component, considering as
necessary, the steady flight loads, fretting effects, and all the other influential
parameters of paragraph e(2)(i)(A).

             (C) An appropriate factor applied to the mean fatigue strength to produce
a working limit (typically 1/3 of mean strength).

             (D) Consideration of all the loads from the complete flight loads spectrum.

              (E) The use of the Miner linear cumulative damage hypothesis, including
both low cycle and high cycle fatigue damages.

                    (iii)   In order to provide an acceptable alternative to the fatigue testing and
simplified analytical methods, these rational methods should be based on a validated
stress analysis. Finite element model correlated to strain gauge measurements for
example, or previous experience of similar designs may be acceptable. The material


Page MG 11 - 10

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →