Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 1 2/12/03
(3) Fatigue evaluation of the structure, measurement of flight loads and stresses,
and evaluations of fatigue strength and/or fatigue crack propagation are the subjects of
this advisory circular. There is some question whether a completely reliable method for
the prediction of time to fatigue crack initiation and fracture exists. Nevertheless, one
engineering approach to the subject is to use the "Linear Cumulative Damage
Hypothesis." This hypothesis states that every cycle of stress above an "endurance
limit" produces fatigue damage proportional to the ratio of cycles accumulated at the
stress to fatigue "life" at that stress.
(4) Laboratory tests of this hypothesis indicate that it is reasonably valid when
the loading spectrum consists of stresses that are, in effect, random. Despite the lack
of an adequate theory connecting this hypothesis with more basic properties of
materials, it has been successfully used in a number of applications to calculate a safe-
life retirement time.
(5) In addition, fatigue evaluation generally requires a method of accounting for
the effect of steady loads and stresses on fatigue. Where the manufacturer does not
provide other substantiating data, a Goodman diagram may be used to account for
these effects.
(6) In any rational fatigue evaluation, the following factors should be
considered:
(i) Identification of the structure to be considered in the fatigue
evaluation. Those elements of the rotorcraft structure that may be critical in fatigue
should be identified. Typical elements include:
(A) Rotor blades and attachment fittings.
(B) Rotor heads, including hubs, hinges, dampers.
(C) Rotor drive components, including gearboxes and transmission shafts.
(D) Control system components, including control rods, servos,
swashplates.
(E) Rotor supporting structure.
(F) Primary flight and ground load paths of the fuselage, including landing
gear, lift frames, stabilizers and auxiliary lifting surfaces.
(ii) The loads and stresses associated with steady and maneuvering
operating conditions expected in service.
Page MG 11 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.