FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 903

PDF page 903 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 903
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                        AC 27-1B, Chg 1

                        CHAPTER 3
                  AIRWORTHINESS STANDARDS
               NORMAL CATEGORY ROTORCRAFT

                 MISCELLANEOUS GUIDANCE (MG)

AC 27 MG 11 FATIGUE EVALUATION OF ROTORCRAFT STRUCTURE

     a. Purpose. This revision to the advisory circular sets forth acceptable means of
compliance with the provisions of Federal Aviation Regulations, §§ 27.571 and 29.571,
dealing with the fatigue safe-life evaluation of metallic rotorcraft structure. The previous
general guidance for fail-safe methodology is retained herein, as this approach also
remains an option for compliance with Federal Aviation Regulation, § 27.571. General
guidance and some background to fatigue evaluation issues are also provided.
Guidance for evaluation of composite structure may be found in Chapter 3, AC 27
MG 8, AC No. 20-107A, and AC 29-2C.

     b. Background. The fatigue evaluation procedures outlined in this advisory
circular are for guidance purposes only and are neither mandatory nor regulatory in
nature. Although a uniform approach to fatigue evaluation is desirable, it is recognized
that in such a complex problem, new design features and methods of fabrication, new
approaches to fatigue evaluation, and new configurations may require variations and
deviations from the procedures described herein. Engineering judgment should
therefore be exercised for each particular application. The flight structure of the
rotorcraft is subject to cyclic vibratory stresses in practically every regime of flight. In
addition, since it is a highly maneuverable aircraft that is capable of forward, rearward,
sideward, vertical, and rotational flight, operating limitations due to fatigue are possible
in practically all flight situations. For these reasons, it is required that special attention
be focused on the fatigue evaluation of the flight structure of the rotorcraft.

         (1) Fatigue evaluation of the flight structure is intended to verify structural
reliability. Assurance of structural reliability starts with design, including choice of
materials for resistance to crack initiation and/or propagation, detail design to minimize
stress concentration, and specification of surface finishes, fits, etc. Design analysis
should include estimation of expected flight loads, and estimation of resistance to
fatigue. Fatigue strength should be based on past full-scale fatigue tests and/or
materials fatigue data with appropriate reductions for the variability in fatigue strength,
size, shape, surface finish, and environments of the structure. In addition, design for
fatigue should consider mode-of-failure analysis, areas susceptible to fatigue cracking,
and methods to assure detectability of fatigue cracks; when fail-safe design is the
chosen method. The residual strength of a cracked structure is an important
consideration of fail-safe design.

         (2) Assurance of structural reliability also includes manufacture and fabrication
in accordance with design requirements and specifications, quality control to monitor
compliance, and effective service inspection procedures.


                                           AC Page MG 11 - 1

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →