Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
(3) Thermodynamic/mechanical capability can be addressed by test stand
mapping of development engines over a range of ambient conditions to establish an
adequate data base of engine characteristics. This will address characteristic slope
variations between engines and establish correction factors necessary for extrapolation
of data from a power assurance checkpoint to the 30-second OEI rating. Statistical
verification and/or modification of the data base may be necessary during production by
mapping of sample production engines. Performance data, at the 30-second OEI
condition, taken during the supplementary block test and also during the “overhaul test”
will demonstrate the capability of an engine and its control system near the end of an
overhaul period to produce the required power. This will demonstrate capability with a
deteriorated base-performance engine.
(4) The question of fuel system limitations and other various limiters, which
could prevent the engine from achieving OEI power on demand, may be addressed by
use of more sophisticated control systems, for example, electronic controls utilizing
several engine parameter limiters each with automatic datum reset capability. Such
control systems can sense an engine failure and automatically reset the operating
limiters upward from “normal” to “OEI” limits. Conventional flow and electronic bench
testing can be used to verify the function and limit setting of the units when new or after
overhaul or repair. The reset features can be extended in function to include a fixed
magnitude pulldown type reset for use in verifying new and field production
engine/control combination function ability. Pulldown type resets are currently in use
today for verification of limiter settings on some engines and can be utilized in this
application to avoid unneeded exposure of the engine to the rapid life expenditure
conditions.
(5) While the above is envisioned as the probable means in which assurance of
capability will occur early in the application of such engines, there will be other means
developed. One such means would be utilization of modern electronic engine condition
or health monitors to display “go” or “no go” conditions relative to the ability of the
engine and its control system to produce 30-second OEI power if required. In this
application the device would be a “power assurance meter” and could be used with
electronic, hydro-mechanical, and pneumo-mechanical control systems. It is entirely
reasonable to expect that self-taught or self-programmed power assurance meters can
be used that continually program the actual performance slope of the subject engine
and extrapolate to the 30-second OEI with continuous engine monitoring.
Self-programming occurs by sampling engine temperature, speed, torque, other
characteristics (such as fuel pressure), and ambient conditions, resulting in the
reflection of an actual characteristic for the installed engine. The availability of this
information permits treating engines individually, whether it is a new or deteriorated
engine or one with either minimum or maximum slope, without the necessary
compromises to “best” engines that necessarily occurs using the earlier statistical
approach. The question of instantaneous fuel system capacity could be addressed by
fuel pump/control systems incorporating bypass systems equipped with flow meters.
The health monitor or power assurance meter can continually integrate the fuel flow
increment available in terms of power increment required in the event of OEI and would
Page MG 9 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.