Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 2 4/25/06
Detectability
0 '0 4 ', • .> • ...., • , • I 0 I 4 .,
' Undetectable damage ........' ' ....... ' . ' . . .
+
Energy
Level of energy selected for compliaoec with
§§ 29 .305, .307 (Static Slrength) and g(5Xvi) of this AC paragraph t
Maximum level of energy selected for the Damage Tolerance
evaluation. This level should not be exceeded in serviec
Figure AC 27 MG 8-2: Characterization of Impact Damage
(1) Both the energy level associated with the static strength
demonstration and the maximum energy level associated with the damage tolerance
evaluation (defined in the figure above) are dependent on the part of the structure under
evaluation and a threat assessment.
(2) Obvious impact damage is used here to define the threshold from
which damage is readily detectable and appropriate actions taken before the next flight.
(3) Barely Detectable Impact Damage defines the state of damage at the
threshold of detectability for the approved inspection procedure. Barely Visible Impact
Damage (BVID) is that threshold associated with a detailed visual inspection procedure.
(4) Detectable Damage defines the state of damage that can be reliably
detected at scheduled inspection intervals. Visible Impact Damage (VID) is that state
associated with a detailed visual inspection.
(5) A threat assessment is needed to identify impact damage severity and
detectability for design and maintenance. A threat assessment usually includes
damage data collected from service plus an impact survey. An impact survey consists
of impact tests performed with configured structure, which is subjected to boundary
conditions characteristic of the real structure. Many different impact scenarios and
locations are typically considered in the survey, which has a goal of identifying the most
Page MG 8 - 20
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.