FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 866

PDF page 866 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 866
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 2                                                           4/25/06


provided and FAA/AUTHORITY-approved early during the certification process and
should, as a minimum, cover the following:

              (A) Vendor and Qualified Parts List (QPL) Control. Applicants should be
able to demonstrate to FAA/AUTHORITY certification team members (both the
manufacturing and inspection district office (MIDO) and FAA/AUTHORITY engineering)
at any time, that their quality control systems ensure on a continuous basis, that only
qualified suppliers provide the basic material constituents or material systems (e.g.,
pre-pregs) that meet approved material specifications. Recommended guidelines for
qualification of alternate material systems and suppliers are contained in MIL-HDBK-17.
These methods can also be used, periodically for qualification status renewals of
existing material systems and suppliers.

              (B) Receiving Inspection and In-Process Inspection. Applicants should be
able to demonstrate to FAA/AUTHORITY certification team members (both MIDO and
engineering), at any time, that their receiving and in-process quality systems provide
products which continuously meet approved material and process specifications.
Quality systems should be designed with appropriate checks and balances, such that
the necessary statistical reliability and confidence levels for the items being inspected
(that are specified by engineering) are continuously maintained. This will require
periodic standard inspections and engineering characterization tests on basic
constituent and material system samples which should be conducted, as a minimum, on
a batch-to-batch basis. The periodic testing necessary to maintain the quality standard
should be conducted by the applicants on conformed samples under their approved
production inspection, fabrication inspection, and quality systems .

             (C) Material System Component Storage and Handling. Applicants
should be able to demonstrate to FAA/AUTHORITY certification team members (both
MIDO and engineering), at any time, that their composite material system (or
constituent) storage and handling procedures and specifications provide products which
continuously meet approved material and process specifications. Quality systems
should be designed with appropriate checks and balances, such that the necessary
statistical reliability and confidence levels for the items being inspected (which are
specified by engineering) are continuously maintained. This should require, as a
minimum, periodic inspections to ensure that proper records are kept on critical
parameters (e.g., room temperature “bench” exposure, shelf life, etc.) and that periodic
basic constituent and material system characterization tests are conducted, on a
batch-to-batch basis. The periodic testing necessary to maintain the quality standard
should be conducted by the applicants on conformed samples under their approved
production inspection, fabrication inspection, and quality systems.

             (D) Statistical Validation Level.  It is necessary to maintain the minimum
required statistical validation level of the quality system (which should be specified for
each critical item or constituent by the approved quality and engineering specifications).
The statistical validation level should be defined and approved early in certification.



Page MG 8 - 10

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →