Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 2/27/2014
(2) Many EMS configurations of normal rotorcraft are equipped with the following:
(i) Attendant and medical personnel seats, which may swivel.
(ii) Multiple litters, some of which tilt.
(iii) Medical equipment stowage compartments.
(iv) Life support and other complex medical equipment.
(v) Human infant incubator (isolette).
(vi) Curtains or other interior light shielding for the flightcrew station.
(vii) External loud speakers and search lights.
(viii) Special internal (intercom) and external communication radio equipment.
*(ix) Flight data monitoring system (FDMS).
*(x) Radio altimeter.
*(xi) Helicopter terrain awareness and warning system (HTAWS).
*(3) All helicopter air ambulance service providers are required to operate at all times
under a part 135 subpart L certificate. The equipment required to obtain operational
approval includes:
*(i) FDMS. The installation guidance is in paragraph b.(13) of this MG.
*(ii) Radio Altimeter (RAD ALT). The installation guidance is in paragraph b.(14) of
this MG.
*(iii) HTAWS. HTAWS is required for operation under part 135 subpart L,
Helicopter Air Ambulance Equipment, Operation, and Training Requirements;
§ 135.605, Helicopter Terrain Awareness and Warning System (HTAWS). The design
standards are in Technical Standard Order (TSO)-C194 and the installation guidance is
in AC 27-1 MG 18.
b. Procedures.
(1) General.
(i) Original type design information and criteria may or may not be
available from the manufacturer. Availability of this information is dependent on whether
the information is considered “public” (i.e., non-proprietary) or proprietary. It may be
Page MG 6 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.