Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
2/27/2014 AC 27-1B, Chg 4
CHAPTER 3
AIRWORTHINESS STANDARDS
NORMAL CATEGORY ROTORCRAFT
MISCELLANEOUS GUIDANCE (MG)
AC 27 MG 6. EMERGENCY MEDICAL SERVICE (EMS) SYSTEMS
INSTALLATIONS INCLUDING: INTERIOR ARRANGEMENTS,
EQUIPMENT, HELICOPTER TERRAIN AWARENESS AND
WARNING SYSTEM (HTAWS), RADIO ALTIMETER, AND FLIGHT
DATA MONITORING SYSTEM.
a. Explanation. This section pertains to EMS configurations and associated
rotorcraft airworthiness standards. EMS configurations are usually unique interior
arrangements that are subject to the appropriate airworthiness standards, part 27 or its
predecessor CAR part 6, to which the rotorcraft was certificated. No relief from the
standards is intended except by § 21.21(b)(1) or an exemption. EMS configurations are
seldom, if ever, done by the original manufacturer.
(1) The FAA has specified in the operating rules the minimum equipment required
to operate as a helicopter air ambulance service provider (identified by an “*” in this
guidance). This equipment, as well as all other equipment presented for evaluation and
approval, is subject to compliance with airworthiness standards. Any equipment not
essential to the safe operation of the aircraft may be approved provided the use,
operation, and possible failure modes of the equipment are not hazardous to the
aircraft. Safe flight, safe landing, and prompt evacuation of the rotorcraft in the event of
a minor crash landing, for any reason, are the objectives of the FAA evaluation of
interiors and equipment unique to EMS.
(i) For example, a rotorcraft equipped only for transportation of a
non-ambulatory person (e.g., a police rotorcraft with one litter) as well as a rotorcraft
equipped with multiple litters and complete life support systems and two or more
attendants or medical personnel may be submitted for approval. These configurations
will be evaluated to the airworthiness standards appropriate to the rotorcraft certification
basis.
(ii) Normal category rotorcraft should comply with flightcrew and passenger
safety standards, which will result in the need to reevaluate certain features of the basic
certified rotorcraft related to the EMS arrangement, such as doors and emergency exits,
and occupant protection. Compliance with airworthiness standards results in placards
or markings for doors and exits, exit size, exit quantity and location, exit access, safety
belts, and possibly shoulder harnesses or other restraint or passenger protection means
to be retained as part of the rotorcraft’s basic type design. These features, including
any placards and markings required as part of the rotorcraft’s basic type design, should
be retained unless specific replacements or alternate designs are necessary for the
EMS configuration to comply with airworthiness standards.
Page MG 6 - 1