Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1BChg 4 12/15/2009
b. Procedures. The certification basis for agricultural dispensing aircraft equipment
installations in the restricted category is § 21.25 as interpreted by Order 8110.56. The
accountable Directorate guidance for the substantiation requirements for rotorcraft is as
follows:
(1) The list of airworthiness standards below is appropriate for most agricultural
dispensing equipment installations and is intended to address the key compliance areas
for those installations. However, it is not intended to be all inclusive for every type of
agricultural dispensing equipment installation, such as those possessing novel or
unusual design features.
Compliance List of 14 CFR, Part 27 Airworthiness Standards for
Agricultural Dispensing Aircraft Equipment Installations
Airworthiness Standard Rule Section
Center of Gravity § 27.27 (Provided an
expanded envelope
is necessary)
Performance (Takeoff) § 27.51
Performance (Landing) § 27.75
Controllability and Maneuverability § 27.143
Static Longitudinal Stability § 27.173
Static Directional Stability § 27.177
Taxiing Condition § 27.235
Excessive Vibration § 27.251
Limit Maneuvering Load Factor § 27.337
Static structural strength at the equipment attachment using § 27.561
emergency landing loads
Fatigue (apply forward airspeed restriction to prevent increasing § 27.571
mast bending and oscillatory loading on dynamic components)
Design and Construction (material strength properties, part 27, Subpart D
protection of materials from environmental conditions, use of
aerospace grade hardware, etc.)
Pilot Compartment Areas § 27.771 thru 27.779
External Loads § 27.865
Equipment Installations § 27.1309
Electrical Equipment and Installations § 27.1351
Circuit Protection Devices § 27.1357
Airspeed Limitations § 27.1503
* Instruction for Continued Airworthiness § 27.1529
Rotorcraft Flight Manual § 27.1581
Operating Limitations § 27.1583
Operating Procedures § 27.1585
Page MG 5 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.