Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
12/15/2009 AC 27-1B, Chg 4
CHAPTER 3
AIRWORTHINESS STANDARDS
NORMAL CATEGORY ROTORCRAFT
MISCELLANEOUS GUIDANCE (MG)
AC 27 MG 5 AGRICULTURAL DISPENSING EQUIPMENT INSTALLATION.
Note: This paragraph has been extensively revised and expanded to clarify the
restricted category certification of agricultural dispensing equipment installations
on rotorcraft.
a. Explanation. In the early development of the rotorcraft, one of its primary usages
was agricultural operation. The FAA recognized that the existing requirements, which
were designed primarily to establish an appropriate level of safety for
passenger-carrying aircraft, imposed an unnecessary economic burden and were
unduly restrictive for the manufacture and operation of aircraft used in agricultural
operations in rural, sparsely settled areas. To resolve this, the FAA developed a special
document that established new standards for agricultural dispensing equipment and
other special purpose operations. This document, Restricted Category CAM 8, became
effective October 11, 1950.
(1) During the re-codification of the CAM’s and CAR’s in 1965, CAR 8 ceased to
exist as a regulatory basis and selected portions addressing certification were
incorporated into 14 Code of Federal Regulations (CFR), part 21. While the specific
standards in CAR 8 were not changed substantively when adopted into part 21, the less
restrictive philosophy of CAM 8 and the policy material that was stated in the preamble
to CAM 8 was not clearly written.
Advisory material published in 1965 and revised in 1975, summarized the information
contained in the advisory portions of CAM 8. Unfortunately, this document specified
that CAM 8 was to be used only in conjunction with certain airworthiness standards for
restricted category certification of small agricultural airplanes.
(3) A survey of restricted category rotorcraft projects related to agricultural
modifications indicates that the CAM 8 philosophy was interpreted to allow the use of
AC 43.13-2A structural criteria for most STCs issued for rotorcraft through the early
1980’s. Since then, more restrictive guidance based on CAR 6 and part 27
requirements has been applied by some ACO’s to several STC applications. Since the
more restrictive guidance imposed a significant economic burden on the industry, the
HAI requested a meeting with the FAA during the 1990 annual convention in Dallas. As
a result of the meeting, an Action Notice to clarify the interpretation of § 21.25(a)(1) for
restricted category aircraft has been issued.
(4) The following advisory material is a result of a reassessment of past and
present policy.
Page MG 5 - 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.