FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 814

PDF page 814 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 814
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B                                                                  9/30/99

configuration; i.e., the minimum proposed by the applicant to meet Part 27
requirements. Reduced capabilities (e.g., restrictions on normal collective movements,
limited aircraft maneuvers, etc.) may be acceptable for degraded FADEC modes or
backup systems not required to meet Part 27 requirements if those degraded
capabilities are reasonable and not hazardous as determined by flight evaluation. The
restrictions should be specified in the flight manual.

              (E) The rotorcraft with FADEC engines must of course meet all of the
Part 27 requirements, but the areas described herein are those which deserve special
attention.

     b. SINGLE CHANNEL FULL AUTHORITY DIGITAL ENGINE CONTROLS
(FADEC) IN SINGLE ENGINE ROTORCRAFT APPLICATIONS.

         (1) Background. The purpose of this appendix is to provide guidance for
compliance to Part 27 and Part 29 Category B regulations when the powerplant
installation is a single engine fitted with a single channel FADEC system. The
application of single channel FADECs in single engine helicopters requires special
considerations because this combination can have a higher probability of
FADEC-related malfunctions that could result in loss of ability to execute a controlled
power-on landing or operate safely throughout the flight envelope, relative to dual
channel FADEC systems or multiengine installations. The issues that should be
addressed by the applicant are criticality level of failures as determined from the
engine system safety analysis (SSA), the resulting integrity requirements, capability
to detect and present failure/fault data to the crew, and the ability of the crew to
manage any failures/faults. The term “must” in this policy is used in the sense of
ensuring the applicability of these particular methods of compliance when the
acceptable means of compliance described herein is used. This policy establishes
an acceptable means, but not the only means of certifying a single channel FADEC
for single engine application.

         (2) Definitions.

                  (i)    Fault or Failure. An occurrence which affects the operation of a
component, part, or element such that it can no longer function as intended (this
includes both loss of function and malfunction).

                   (ii)    Integrity. The term “integrity” for the purpose of this policy includes
the hardware reliability requirements as well as the software level requirements
commensurate with the system criticality.

                    (iii)   Single Channel FADEC. A single channel FADEC system is one
which provides full authority control of the engine from below ground idle to 100
percent power and in some cases from engine start similar to more complex dual
channel redundant FADEC systems, but without a fully capable second channel
providing a dual redundant system. The backup for the single channel FADEC is


Page MG 4 - 4

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →