Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
monitoring system described in paragraph b.(19) above. Refer to section AC 27 MG 15
of this AC for guidance on the certification of HUMS.
(ii) Health Monitoring Systems.
(A) We anticipate that these systems will begin as “optional” systems in
order to build a data base to support expansion of the approval to achieve credit for
extension of maintenance intervals, and so forth. Some of these applications may
require system redundancy and some may require level A or equivalent software as
defined in RTCA Document DO-178.
(B) Some systems that are under consideration will utilize off aircraft
processing of data. If pursuing this, assume that the aircraft data will be lost or
misplaced at the processing center, and the aircraft system design should consider this
possibility. Some on board data storage is one way to account for this lost data. The
integrity of the processing center’s software should be equal to that of the aircraft
software. In addition, specify the intervals for processing the data from each flight as
part of the approval.
(C) Due to the limited experience with these systems, we
suggest using the issue paper process to record the progress of the approval, and to
provide information for later updating of this guidance material.
Page MG 1 -19
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.