Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
to assure that it is performing its intended function. Determine that the transponder
system does not interfere with other systems (except possibly the DME) aboard the
rotorcraft and that other equipment (except possibly the DME) does not interfere with
the operation of the transponder system. There should be no dropouts, that is, when
there is no return for two or more sweeps. Verify the operation of the ATC transponder
over the station at 25 NM and at 80 NM.
(C) Long range reception. Perform two 360° turns, one to the right and
one to the left, at bank angles of 8° to 10° with the flight pattern 80 NM from the radar
facility. During these turns, monitor the radar display to ensure there are no signal
dropouts (two or more sweeps).
(10) Weather Radar Equipment.
(i) Bearing Accuracy. The indicated bearing of objects shown on the display
should be within 5° of their actual magnetic bearing within the sectors 40° right and left
of the aircraft longitudinal axis. Beyond 40° right and left, bearing accuracy should be
±10°.
(ii) Distance of Operation. The radar should be capable of displaying
prominent targets throughout the distance and angular range of the display.
(iii) Antenna Stabilization. When providing antenna stabilization, it should
eliminate blurring of the display for its designed ranges of pitch and roll.
(iv) Beam Tilting. Install the radar antenna so that its beam is adjustable to
any position between 10° above and 10° below the plane of rotation of the antenna.
(v) Technique.
(A) Bearing Accuracy. Fly under conditions that allow visual identification
of a target, such as an island, a river, or a lake, at a range within 10 percent of the
maximum range of the radar. When flying toward the target, select a course that will
pass over a reference point with a known bearing to the target. When flying a course
from the reference point to the target, determine the error in displayed bearing to the
target on all range settings. Change heading in increments of 10° and determine the
error in the displayed bearing to the target.
(B) Contour display (iso echo). If there are reports of heavy cloud
formations or rainstorms within a reasonable distance from the test base, select the
contour display mode. The radar should differentiate between heavy and light
precipitation. In the absence of the above weather conditions, determine the
effectiveness of the contour display function by switching from normal to contour display
while observing large objects of varying brightness on the indicator. The brightest
objects should become the darkest when switching from normal to contour mode.
Page MG 1 -11
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.