Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/17/2009 AC 27-1B, Chg 4
(D) For turbine-powered rotorcraft in all categories, a power assurance
check chart.
(E) A statement of the maximum crosswind and downwind components
that have been demonstrated as safe for operation near the ground.
(v) Miscellaneous Performance Data. Any performance information or
data not covered in paragraphs AC 27.1587a(2)(iv)(A) through (E) above, but
considered necessary or desirable to enhance safety or to enable application of the
operating regulations, should be included.
(vi) Flightcrew Notes. It is recommended that provisions be made in the
“unapproved” portion of the Rotorcraft Flight Manual for inclusion of information and
data of a type that is useful or desirable for operation of the rotorcraft but is not
approved by FAA/AUTHORITY. (Material in this section should be consistent with
material in the approved portion of the manual.)
b. Procedures. None.
AC 27.1587A. § 27.1587 (Amendment 27-44) Performance Information.
a. Explanation. Amendment 27-44 added the requirement to include in the
Rotorcraft Flight Manual (RFM), the weight at the maximum takeoff and landing altitude
for which the rotorcraft can safely hover out-of-ground-effect (OGE) in winds of at least
17 knots in all azimuths. This change is in conjunction with the new demonstration
requirements of § 27.143(d). Additionally, this change makes clear that the in-ground
effect (IGE) performance with winds of at least 17 knots be included in the RFM.
All the policy material pertaining to this section remains in effect with the following
changes:
(1) This section contains the performance information necessary for operation
in compliance with applicable performance requirements of part 27 and applicable
special conditions together with additional information and data essential for
implementing pertinent operational requirements.
(2) Information on limiting height/speed envelope must be given up to at least
7,000 feet as required in § 27.79. Giving information on limiting height/speed envelope
at altitudes over 7,000 feet is desirable but not mandatory. For this information it is
permissible to use a different extrapolation method, provided there is technical data to
back it up.
(3) Performance information and data may be presented for the range of
weight, altitude, temperature, and other operational variables stated as operational
performance limitations. It is recommended that substantial performance information
and data be presented per the following paragraphs. Where applicable, reference to
Page G – 47
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.