FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-45

PDF page 772 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 772
AC 27-1B · G-45Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                            AC 27-1B

         (3) The use of illustrations to show controls, instruments, explain systems, etc.,
is encouraged.

         (4) If the unusable fuel supply in any tank exceeds 5 percent or 1 gallon,
whichever is greater, a statement should appear in the normal procedures section to
warn the pilot that the quantity of fuel remaining in the tank when the gauge reads zero
is not usable in flight.

AC 27.1585A.   § 27.1585 (Amendment 27-21) OPERATING PROCEDURES.

         a. Explanation. Amendment 21 to the regulation adds the requirement to
present the airspeeds and type of landing surface used in takeoff and landing tests.
Additionally, the airspeeds and rotorspeeds for minimum rate of descent and best glide
in autorotation at maximum gross weight should be presented in the Rotorcraft Flight
Manual (RFM).

         b. Procedures. All of the policy material pertaining to this section remains in
effect with the following additions:

             (1)   Takeoff and landing procedures and speeds and the kind of surface
used in takeoff and landing tests should be presented in the Normal Procedures section
of the RFM.

             (2)  The airspeeds and rotor speeds corresponding to minimum rate of
descent and maximum gliding distance in autorotation should be included in the
Emergency Malfunction section of the RFM.

AC 27.1587. § 27.1587 (Amendment 27-21) PERFORMANCE INFORMATION.
[See new AC 27.1587A (dated 9/17/2009) posted as separate document in RGL with
this Master AC.]
     a. Explanation.

         (1) This section contains the performance information necessary for operation
in compliance with applicable performance requirements of FAR Part 27 and applicable
special conditions together with additional information and data essential for
implementing pertinent operational requirements.

         (2) Performance information and data may be presented for the range of
weight, altitude, temperature, and other operational variables stated as operational
performance limitations.  It is recommended that performance information and data be
presented substantially in accordance with the following paragraphs. Where applicable,
reference to the appropriate requirement of the certification or operating regulation
should be included.





                                                       Page G - 45

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →