Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
(iv) Extended overwater operations (ditching).
(v) External load operation.
(8) Limiting heights and speeds are determined under § 27.79 and are
presented in the form of a height versus velocity diagram in the performance information
section.
(9) Often other limitations are included in the limitations section that are not
specifically mentioned in the rules but which are necessary for safe operation.
Examples are:
(i) Altitude limits.
(ii) Ambient temperature limits.
(iii) Conditions for use of rotor brake.
(iv) Prohibitions against prolonged hover in cross or tail winds to prevent
accumulation of noxious fumes in cockpit or cabin.
(v) Prohibitions against acrobatic maneuvers.
(vi) Required placards including text and location.
(vii) Special airworthiness equipment installations such as engine out or
low rotor RPM warning systems.
AC 27.1585. § 27.1585 (Amendment 27-16) OPERATING PROCEDURES.
a. Explanation. The procedures sections of the manual should contain essential
information peculiar to the particular type or model, the knowledge of which may be
expected to enhance safety in the kinds of operations for which the type or model is
approved. Information or procedures not directly related to airworthiness, or not under
control of the crew, should not be included, nor should any procedure which is accepted
as basic airmanship.
(1) Procedures information should be presented with respect to normal and
emergency procedures. Alternatively, information outside the category of normal
procedures may be subdivided into categories described as “abnormal” procedures and
“emergency” procedures, as described herein.
(2) Notes, cautions, and warnings may be used to emphasize specific
instructions or information in general accord with the following.
Page G - 42
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.