Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
process. The limitations should be presented with explanation when approved. To the
maximum practicable extent, the limitations should be presented in “operations”
language and format. Since operation of the rotorcraft in accordance with such
limitations is required by the operating regulations, the following should be inserted as a
note at the beginning of this section: “Operation in compliance with the limitations
presented in this section is required by the Federal Aviation Regulations.”
Section 27.1583 merely states that certain information must be given. The specific
information is found during the showing of compliance with other paragraphs in the
regulation.
b. Procedures.
(1) Section 27.1545 gives the markings required for the airspeed indicator.
(2) Rotor limits are established during compliance with § 27.33. The method of
marking is specified in § 27.1549.
(3) Powerplant limits are discussed under § 27.1549.
(4) Weight limitations are specified in § 27.25. In the operating limitations
section, there should be a statement of the maximum and minimum certificated takeoff
and landing weights.
(5) Center of gravity limits are determined in accordance with § 27.27. Detailed
center of gravity limitations information may either be presented in the limitations
section of the flight manual or presented as a statement in limitations section which
references charts or page numbers in the performance section. If landing gear position
can measurably affect allowable CG, this information should be presented together with
the moment change due to gear retraction.
(6) The minimum flightcrew is determined under § 27.1523 and is dependent
upon the kinds of operation authorized. The established number and identity, by crew
position of the minimum flightcrew, must be listed.
(7) Kinds of operations are established under § 27.1525. This section should
contain the following preamble: “This rotorcraft is certified in the normal category (A
and/or B) and is eligible for the following kinds of operation when the appropriate
instruments and equipment required by the airworthiness and/or operating rules are
installed and approved and are in operable condition.” Those of the following, and any
others that are applicable, should be listed.
(i) Day and night VFR.
(ii) Approved to operate in known icing conditions.
(iii) IFR.
Page G - 41
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.