FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-33

PDF page 760 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 760
AC 27-1B · G-33Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

9/30/99                                             AC 27-1B

       SUBPART G - OPERATING LIMITATIONS AND INFORMATION

                 ROTORCRAFT FLIGHT MANUAL


AC 27.1581. § 27.1581 (Amendment 27-14) ROTORCRAFT FLIGHT MANUAL
         GENERAL.

     a. Explanation.

         (1) The primary purpose of the Rotorcraft Flight Manual (RFM) is to provide an
authoritative source of information considered to be necessary for or likely to promote
safe operation of the rotorcraft.

         (2) Since the flightcrew is most directly concerned with operation of the
rotorcraft, the language and presentation of the flight manual shall be directed
principally to the needs and convenience of the flightcrew but should not ignore the
needs of other contributors to safe operation. As used with respect to the RFM, safe
operation is construed to include, but not be limited to, operation of the rotorcraft in the
manner that is mandatory for, or recommended for, compliance with applicable
airworthiness requirements and with the particular provisions of the operating
regulations relating to the rotorcraft’s approved performance capabilities.

         (3) To serve its intended purpose, therefore, the RFM must include the
certificate limitations established for the design as a consequence to the type
certification evaluation, the performance information necessary to establish the
operating limitations imposed through application to the operating regulations
(FAR Parts 91, 127, and 135), and the procedures and other information necessary to
enable the flightcrew to safely operate the rotorcraft within the envelope of limitations
thus delineated. The outline presented in this circular is directed toward those
objectives.

         (4) Information and data that are mandatory for an acceptable RFM are
prescribed in §§ 27.1581 through 27.1589, and nothing contained in these sections
should be construed as amending those requirements. Certain additional elements of
flight manuals, however, have been shown by experience to be practical necessities if
the document is to serve effectively its intended purpose.

     b. Procedures.

         (1) The following criteria do not affect the status of RFMs which are presently
approved. When such manuals are amended in the future, however, it is recommended
that the concepts of this section be incorporated wherever uniformity or clarity will result.

         (2) Only the material required by FAR Part 27, or that considered necessary to
implement the operating regulation, should be included in the portion of the manual that


                                                       Page G - 33

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →