Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
AC 27.1565. §27. 1565 (Amendment 27-2) TAIL ROTOR.
a. Explanation.
(1) This standard concerns tail rotor disc visibility in normal daylight ground
conditions. Amendment 27-2 added “daylight” to the standard. A personnel guard is
not required. The tail rotor shall be marked to achieve a conspicuous disc whenever the
blades are rotating.
(2) Completely shrouded or protected blades may not require contrasting color
segments if the shroud provides equivalent protection for personnel on the ground. A
simple tubular guard does not alleviate this standard.
b. Procedures.
(1) Each tail rotor blade shall be marked with contrasting colors.
(2) During FAA/AUTHORITY compliance inspections or during the flight test
program, the tail rotor will be evaluated, qualitatively, in daylight for a conspicuous disc.
(3) As an aid to select proper colors for conspicuousness, see AC 20-47,
Exterior Colored Band around Exits on Transport Airplanes. This AC concerns, in part,
methods for measuring reflectance (3:1 factor) and contrast colors for transport aircraft.
Section 29.811(b)(2) requires contrast colors for transport rotorcraft. This AC also
contains suggestions for chromatic contrast. A 3:1 reflectance factor between rotor
blade segment colors is acceptable. It is recommended that a few combinations of
colors be approved to provide a selection of color combinations. The type design
drawings will include the necessary information and data for design control.
Page G - 32
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.