Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B 9/30/99
contrasting colors that comply with § 29.811 and have at least 30 percent difference in
reflectance. Advisory Circular 20-47, Exterior Colored Band Around Exits on Transport
Airplanes, provides information about measuring reflectance of colors. The standard
concerns a qualitative or objective standard, however.
(5) Advisory Circular 20-116, Marking Aircraft Fuel Filler Openings with
Color-Coded Decals, concerns color-coded decals for fuel filler openings. These decals
generally supplement the markings required by the certification standards.
AC 27.1559. § 27.1559 (Amendment 27-21) LIMITATIONS PLACARD.
a. Explanation.
(1) The content of and information on the placard has been changed
significantly as a result of associated and complementary changes in the airworthiness
standards and the maintenance and operating rules. Regardless of content, the placard
must be in clear view of the pilot (or pilots).
(2) By adoption of FAR Part 27 in 1965, the standard and its predecessor
CAR Part 6, required compliance with the operating limitations in the approved
Rotorcraft Flight Manual.
(3) In conjunction with the adoption of an Airworthiness Limitations Section for
the maintenance manual as stated in § 27.1529 of Amendment 27-3, the content of the
placard was changed significantly to require compliance with the requirements in that
section. The maintenance rule (§ 43.16) was also adopted in 1968.
(4) Amendment 27-8 adopted standards to allow use of a combination of
manual material, markings, and placards rather than mandate a Rotorcraft Flight
Manual. The requirement for the placard content was revised accordingly.
(5) Amendment 27-18, issued in 1980, adopted standards requiring
“Instructions for Continued Airworthiness” (maintenance manual). This manual may
include an Airworthiness Limitations Section, which is a segregated and approved part
of the manual. The maintenance and operating rules, §§ 43.15, 43.16, 91.163(c) and
other operating rules require compliance with the Airworthiness Limitations Section.
Similarly, other airworthiness standards were adopted for airplanes, engines, and
propellers to require Instructions for Continued Airworthiness and an Airworthiness
Limitations Section. See paragraph AC 27.1529 for further information.
(6) Amendment 27-21 adopted a significant change for the placard. The
placard must be in clear view of the pilot and must provide a convenient cockpit
presentation of the approved types of operation for each aircraft. Other operating and
maintenance rules referenced in the previous paragraph provided the basis for much of
this reduction in the placard content.
Page G - 30
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.