Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
(1) Baggage, cargo and ballast markings must state the allowable maximum
weight and the distributed (floor) loading, where appropriate. The markings should
prevent overloading the compartment and its floor or the ballast installation.
(2) Seats must be permanently marked as prescribed with the design allowable
occupant weight if the seat is designed for less than a 170-pound occupant. The
placard specified here is not related to a rotorcraft operating weight or loading limitation.
(3) Fuel and oil tank filler openings must be marked as prescribed to provide
essential information for proper fluids and to provide limitation data for pressures in
refueling/defueling systems if installed.
(4) Emergency exit placards or markings, inside and outside, shall be red (red
with white background for visibility or reversed colors). Locating signs and operating
signs or placards are required. See paragraph AC 27.783 (§ 27.783) for door marking
requirements.
(5) Markings must be conspicuous and durable as prescribed in § 27.1541(b).
b. Procedures.
(1) The type design drawings such as general “markings” drawing should be
reviewed for compliance. During an interior/exterior compliance inspection, usually
conducted prior to issuing the TIA, compliance with the standard should be confirmed or
ensured. If an FAA/AUTHORITY conducted F&R program is prescribed, complete
“production” aircraft markings should be installed prior to beginning the program. As a
continuation of the FAA/AUTHORITY evaluation, the markings shall be checked during
the F&R program. Contrasting colors are essential. Various paint schemes should be
checked for compliance.
(2) Allowable maximum weight and floor distributed loading and possibly
baggage tiedown and security instructions are generally included in the cargo
compartment markings. A placard, stencil, or equivalent that is conspicuous and
durable may be placed on the compartment door, wall, etc.
(3) For fuel and oil filler markings, contrasting colors between letters and
background are essential. The visibility of the markings should not be affected by
changing paint schemes or colors. This may be accomplished by decals having a
contrasting background. Stencil markings should be discouraged for fuel and oil
markings.
(4) Emergency exit marking performance standards are also contained in
paragraph AC 27.807. It is recommended that the exit locating sign (interior) be
readable from the farthest seat in the cabin and that the identification of the operating
handle or device and the operating instructions be readable from a distance of
30 inches. It is further recommended that external exit instructions or markings have
Page G - 29
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.