FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 751

PDF page 751 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 751
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014

AC 27.1553.   § 27.1553 FUEL QUANTITY INDICATOR.

     a. Explanation. This section describes the markings necessary to identify the
portion of unusable fuel that cannot be used in level flight. Unusable fuel may be
present in a design due to the relative configuration of the fuel tank to the fuel tank
outlet (e.g., sumps, unusual elevations and/or configurations dictated by aircraft
contours, etc.).  If the unusable fuel supply for any tank is less than or equal to 1 gallon
or is less than or equal to 5 percent of the tank capacity, whichever is greater, this
section does not apply.

     b. Procedures. For each fuel tank which has an unusable fuel capacity exceeding
1 gallon or 5 percent of the tank capacity, whichever is greater, the following should be
accomplished.

         (1) Calibration computations, measurements, and/or tests should determine the
zero (empty) position on the fuel quantity indicator. (reference § 27.1337).

         (2) The lowest reading obtainable in level flight must be determined by
computation, measurement, and/or testing.

         (3) Once the instrument readings defined by paragraphs b(1) and (2) above
have been determined, a red arc should be placed between the readings on the fuel
quantity indicator.

         (4) Appropriate notations should be made in the flight manual to define the
intent of the red arc to the flightcrew (reference § 27.1585(e)).





Page G – 26.2

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →