Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
3/31/2014 AC 27-1B, Chg 4
AC 27.1551. § 27.1551 OIL QUANTITY INDICATORS.
a. Background. This section states that each oil quantity indicator must be
marked with enough increments to indicate readily and accurately the quantity of oil.
b. Procedures. There are several different ways in which the oil quantity indicator
may be presented. Some of the ones more prevalent in the industry are:
(1) Oil quantity indicator. (Generally used when large amounts of reserve oil
are required.)
(2) Oil quantity dip stick. (Most common method of measuring engine oil.)
(3) Oil quantity sight indicator. (Generally used for measuring transmission and
gearbox oil quantities.)
c. No matter what method of oil quantity indicator is used, the indicator should be
marked so that the oil quantity can be accurately determined. This can range from
increments marked in gallons, such as oil quantity indicators for large amounts of oil, to
oil quantity indicators marked in quarts with full and add marks, such as engine dip
sticks. Sight indicators with full and add marks have been used successfully for
gearboxes. Sight indicators normally do not reflect quantities. These are some of the
methods currently in use to indicate the oil quantity. In all cases, those methods
identified above have proved to be acceptable methods of showing compliance with the
§ 27.1551.
Page G – 26.1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.