Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
6/23/23 AC 27-1B, Chg 9
AC 27.1549C.§ 27.1549 (AMENDMENT 27-51) POWERPLANT INSTRUMENTS.
a. Explanation. Amendment 27-51 changed the requirements for displaying the
normal operating range of powerplant instruments. Most modern glass cockpit designs
utilize the “dark, quiet cockpit” concept, which means that yellow or red is presented to
indicate abnormal conditions; green ranges are not presented. This approach has
required a finding of equivalent safety with § 27.1549(b) for applicants using an
unmarked normal operating range instead of green. Section 27.1549(b) continues to
allow the green operating range to be displayed as green, but now permits an option for
the normal operating range to be unmarked.
b. Procedures. The policy pertaining to these requirements, which is found in
section 27.1543 of this AC, remains in effect with the following changes and additions.
For compliance with §§ 27.771(a) and 27.1549(b), electronic displays that lack
green arcs must include features that permit the pilot to easily interpret (by way of
glancing at the instrument) whether a parameter is in a precautionary range (yellow) or
beyond a limit (red). In addition, consistency in displaying all required indications should
be maintained between the primary instrument and the standby instrument to reduce
any confusion in the cockpit when failures require using the standby instrument.
Page G - 26
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.